2010 - 2019 OEM GMC Terrain 4 Button Flip Key w/ Remote Start - OHT01060512

Dealer Price $112.08 Your Price $53.49 You save $58.59 That's 52.28% OFF dealer price!
Availability: In stock

Want us to cut the key before shipping it? Contact us with the "key code" to your vehicle and pay the $20 cutting fee and we can make it happen for ya! The key code can be obtained by physically going to the dealership with proof of ownership. The key code is confidential information and they will not give it over the phone.

2010 - 2019 OEM GMC Terrain 4 Button Flip Key w/ Remote Start - OHT01060512


2010 - 2019 GMC Terrain

180 Day Satisfaction Guarantee!

If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.


More Information
FCC NumberOHT01060512
OE Part #20873622
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
Programming Information

Please contact us via phone (1-855-224-7258) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to!

If our techs inform you that this product needs to be programmed by a Locksmith

Product ConditionRefurbished
Programming Instructions

IMPORTANT: You must first cut your new key cut before starting this programming process. If you'd like us to cut the key for you please contact us. 

1. Insert the original, already programmed key in the ignition and start the engine.

2. After the engine has started, turn the key to off and remove the key.

3. Insert the key to be programmed and turn it to on within 10 seconds of removing the original key.

4. The security light will turn off once the key has been programmed. It may not be apparent if the security light went on due to how quickly the key is programmed. If your vehicle does not have a security light (04-07 Grand Prix, Bonneville, Impala) wait 10 minutes and 45 seconds to make sure the key has been programmed.

5. Repeat steps 1 through 5 if additional keys are to be programmed.