2010 - 2019 Toyota/Scion 3 Button Remote Head Key - HYQ12BBY/ HYQ12BDC - G Chip

2010 - 2019 Toyota/Scion 3 Button Remote Head Key - HYQ12BBY/ HYQ12BDC - G Chip

2010 - 2019 Toyota/Scion 3 Button Remote Head Key - HYQ12BBY/ HYQ12BDC - G Chip

Dealer Price $215.6 Your Price $64.99 You save $150.61 That's 69.86% OFF dealer price!
Availability: In stock
SKU
2716

2010 - 2019 Toyota/Scion 3 Button Remote Head Key - HYQ12BBY/ HYQ12BDC - G Chip

- Please verify that your existing key has a 'G' stamp on the blade before purchasing this remote.

Fits:

2010 - 2012 Scion xB (Check Split Year 2010)
2010 - 2019 Toyota 4-Runner
2010 - 2012 Toyota RAV4 (Check Split Year 2010)
2010 - 2013 Toyota Yaris (Check Split Year 2010)
2011 - 2015 Toyota Venza

More Information
SKU2716
FCC NumberHYQ12BBY, HYQ12BDC
OE Part #89070-42750, 89070-35170
SupportYour purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee!If you are not 100% satisfied, you may return the product within thirty days of receipt for a refund. Please see our return policy for further info.
Programming InformationONLY TWO models come with self programming instructions. You can view them under the 'Programming Instructions' tab. All other models will need an automotive locksmith to come out and program the unit in for you. The cost for key cutting/program will vary depending on your location.
Product ConditionRefurbished
Programming Instructions

2010 XB and Yaris

 

Obtain all remote transmitters for this vehicle.

 

1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.


2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.


4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.


5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.


6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.


7. Open drivers door.

 

msrp215.60