2018 - 2021 GMC Terrain 5 Button Smart Remote w/ Remote Start - Emergency Key Included - 315Mhz - HYQ1AA
Your Price $128.39
Availability: In stock
SKU
7590
2018 - 2021 GMC Terrain 5 Button Smart Remote w/ Remote Start - Emergency Key Included - 315Mhz - HYQ1AA
EKey: 6101
Fits:
2018 - 2021 GMC Terrain
180 Day Satisfaction Guarantee!
If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further information.
| SKU | 7590 |
|---|---|
| FCC Number | HYQ1AA |
| OE Part # | 13584502 |
| Support | Your purchase gives you 100% free e-mail and phone technical support from our expert staff. |
| Programming Information | Please contact us via phone (1-855-224-7258) or live support chat to the bottom right of our website to confirm programming for this product. Our techs will make sure you know everything you need to! If our techs inform you that this product needs to be programmed by a Locksmith, you may do Google search here for 'automotive locksmith' followed by your zip code. We suggest calling Locksmiths to find the best rate for the programming and/or cutting service. |
| Product Condition | Refurbished |
| Programming Instructions | A new transmitter can be programmed to the vehicle when there are TWO recognized transmitters.To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.
1. Remove the key lock cylinder cap on the driver door handle. Place the two recognized transmitters in the cup holder.
2. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds.The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4, ETC
3. Place the new transmitter into the cup holder.
4. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
5. Remove the transmitter from the cup holder and press UNLOCK or LOCK on the transmitter. To program additional transmitters, repeat Steps 3–5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
6. Put the key back into the transmitter.
If TWO currently recognized transmitters are not available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the transmitters you wish to program must be with you.
1. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP. The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE# 1.
4. Place the new transmitter into the cup holder. 5. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter. 6. Remove the transmitter from the cup holder and press unlock or lock on the transmitter. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode. 7. Put the key back into the transmitter.
|
Same Day shipping on
Expedited ordered before 2pm.
180 day
replacement guarantee
ONLINE SUPPORT
Free chat, phone, and email support.
