Enter Your Email Address For

An Instant $5.00 OFF Coupon!

Find My Remote or Key Now!

2000 - 2002 Infiniti G20 4 Button Keyless Entry Remote Fob - KBRASTU10 - Model /A

Availability: In stock

Dealer Price: $196.22

$75.00

You Save: $121.22

That's 61.78% OFF Dealer price!

this link

2-Years Extended Warranty Plan

Replace My Remote offers an optional Extended 2-Year warranty on all remote and remote key products for Only $7.99. You can view the full terms and coverage of the warranty by clicking the  blue "View All Terms" link. Simply check the "Warranty" check box to add the 2 year extended warranty to your product.

This is an authentic factory/OEM device meant to operate your specific vehicle.

61.78%
off

2000 - 2002 Infiniti G20 4 Button Keyless Entry Remote Fob - KBRASTU10 - Model /A

More Views

2000 - 2002 Infiniti G20 4 Button Keyless Entry Remote Fob - KBRASTU10 - Model /A

*IMPORTANT* Your current remote has a Model number on the back of it. You MUST match this up with the replacement remote. This unit's model is: Model /A. For Model /01A click here

Production after 06/2000 only

Fits:

2000 - 2002 Infiniti G20

Additional Information

SKU 1056-M/A
FCC Number KBRASTU10
OE Part # 28268-7J107
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further info
Programming Information This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab.
Product Condition Refurbished
Manufacturer's Suggested Retail Price $196.22
  1. Close and lock all doors with the driver's side power lock / unlock switch located on drivers door panel.
  2. Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). Your hazard lamps will flash if you have performed this step correctly. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.
  3. Insert key into ignition and turn to the ACC position.
  4. Within 5 seconds, push the LOCK button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.
  5. If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press LOCK button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes).
  6. When all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door. Test all remotes.

Customer Reviews of Our Service
Please Note: Reviews about self-programming do not indicate the product above is self-programmable. Please inquire about each product.
Back up
1
Get Your Coupon Now for
3% Off Your Purchase!
Receive a 3% Off Coupon Code in Your email within just minutes by simply signing up for our Newsletter. Then, just apply the coupon code at checkout for Your Savings.