Enter Your Email Address For

An Instant $5.00 OFF Coupon!

Find My Remote or Key Now!

1993 - 1996 Pontiac/Oldsmobile 3 Button Keyless Entry Remote - ABO0116T

Availability: In stock

Dealer Price: $85.00

$29.99

You Save: $55.01

That's 64.72% OFF Dealer price!

This is an authentic factory/OEM device meant to operate your specific vehicle.

64.72%
off

1993 - 1996 Pontiac/Oldsmobile 3 Button Keyless Entry Remote - ABO0116T

More Views

1993 - 1996 Pontiac/Oldsmobile 3 Button Keyless Entry Remote - ABO0116T

Fits:

1995 Oldsmobile Aurora  
1993 - 1996 Oldsmobile Achieva
1993 - 1996 Oldsmobile Cutlass Ciera
1993 - 1996 Oldsmobile Cutlass Supreme
1994 - 1996 Pontiac Grand Am

Additional Information

SKU 933
FCC Number ABO0116T
OE Part # 12522339
Support Your purchase gives you 100% free e-mail and phone technical support from our expert staff.
180 Day Satisfaction Guarantee! If you are not 100% satisfied with your product for any reason, you may return the product within 180 days of ordering for a replacement. Please see our return policy for further info
Programming Information This remote comes with self programming instructions. You can view them under the 'Programming Instructions' tab. NOTE: When looking under the 'Programming Instructions' tab please look for your specific model as the programming instructions vary.
Product Condition Refurbished
Manufacturer's Suggested Retail Price $85.00

1993 - 1996 Oldsmobile Achieva
1994 - 1996 Pontiac Grand Am

1.  Locate the programming connector located in the LH trunk. Trim may
     have to be pulled back to access programming connector. ( Connector
     has wires leading up to it and it is not connected to anything.)

2.  Jump programming connector terminals. Leave terminals jumped
     unitl step 6.

3.  System should now lock and unlock doors to indicate 
      programming mode has been entered. 

4.  Press any button on keyless remote once.
     System should now lock and unlock doors, indicating successful 
     programming of keyless remote.  

5.  Repeat step 4 for additional remote or other existing keyless remote.
    
     NOTE: A maximum of only two Keyless Remotes can be programmed.

6.  Remove programming connector jumper wire to exit programming mode.

7.  Test remote(s).


1993 - 1996 Oldsmobile Cutlass Ciera

 

Obtain all remote transmitters for this vehicle.

1. Open trunk and locate the Programming Connector by the left side wheel well. Programming Connector may be behind the trim or carpet and will not be connected to anything. It will be a plastic connector with two wires running from it.

2. Ensure that there are two metal pins or terminals in the connector. Jump one pin to the other. This can be done with a jumper wire or a paper clip bent. Once jumped properly the door locks will cycle to lock then unlock.

3. Vehicle is now in programming mode. Press unlock on the remote once. When accepted the door locks will cycle again to lock then unlock.

4. Repeat step 3 when programming a second remote.

5. Programming is now complete. Remove jumper wire from Programming Connector and test remotes to ensure proper programming.


1993 - 1996 Oldsmobile Cutlass Supreme

 

Obtain all remote transmitters for this vehicle.

1. Access programming connector in RH side of trunk (passenger side) you may need to pull back some trim to find or access it. Connector will not be connected to anything and should be one black/white wire. It will have a plug on the end of it with one hole in it or port.


2. Jump programming connector using a suitable jumper wire with ground. Jumping the connector means to use a wire or paperclip to make a connection between the port and ground. Be sure you are making contact with the metal inside the port and touch the other end of the jumper wire to a nearby bolt or unpainted metal surface on the body of the vehicle.


3. System should now lock and unlock doors to indicate successful entry into programming mode.


4. Press any button on remote one time. System should now lock and unlock doors to indicate successful programming of remote.


5. Repeat step 4. for each additional remote including working ones.


6. To exit programming mode remove jumper wire and test all remotes.

 

1995 Oldsmobile Aurora 

Obtain all remote transmitters for this vehicle.

 

dlc-port-1-16.jpg

 

1. Locate the Data Link Port. It is located under drivers side dash. You may need to lay on the floor and look up under the dash to see it. Be sure you know which ports are 8 and 4. Notice the port is wider on the top row. If you are looking at the port with the wide row on top and the narrow row on bottom, Port 1 will be in the upper left corner and port 8 in the upper right corner. Be sure there are metal pins inside ports 8 and 4. Please refer to the diagram above to locate the proper pins. The numbers are not on the connector, they are only for reference.

2. Connect pin 8 to pin 4 with a suitable jumper wire. Any short piece of wire will work fine. A paper clip bent in the shape of a U will work perfect. (leave the jumper wire connected throughout the programming procedure).

3. Insert key into the ignition and turn the ignition cylinder to the ON position. The vehicle will respond by locking and unlocking the doors to indicate vehicle has entered programming mode.

4. Press and hold both the LOCK and UNLOCK buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the remote.

5. Within one minute, repeat step 4 on all additional remotes including working ones to be programmed.

6. Remove the jumper wire connected to the Data Link Port.

 

 



Customer Reviews of Our Service
Please Note: Reviews about self-programming do not indicate the product above is self-programmable. Please inquire about each product.
Back up
1
Get Your Coupon Now for
3% Off Your Purchase!
Receive a 3% Off Coupon Code in Your email within just minutes by simply signing up for our Newsletter. Then, just apply the coupon code at checkout for Your Savings.